Slider

http://3d.3dbiocadedu.com/wp-content/uploads/sites/10/2016/08/truzirat.jpg

TruZir Anterior Translucency

New TruZir Anterior Translucency zirconia is our highest translucency zirconia with excellent aesthetics. 3D BioCAD Zirconia is strong and goes under cold isostatic pressure process; therefore, the blank is more homogeneous then uniaxial pressed zirconia, and the shrinkage factor is even throughout the blank.
Anterior Translucent (AT) blocks are available in Size: 10, 12, 14, 16, 18, 20, 22, 25mm


Gallery

Arrow
Arrow
ArrowArrow

Slider


Specifications

Product TruZir Anterior Translucency
Density Before Sintering >2.8g/cm3
Density After Sintering 6.04±0.03g/cm3
CTE After Sintering (25-200°C) 10.5±1.0×10-6K-1
3-Point Flexural Strength After Sintering >600Mpa
Accelerated Aging Surface Monoclinic Phase Content < 5%
Average Transmittance 49%
Chemical Solubility After Sintering < 100μg/cm2
Cytotoxicity Test 0 Level
Radioactivity After Sintering < 0.1Bq/g
Sintering Temperature 1430-1470°C

Interested?
Have Questions?
Contact Us!