A CASTABLE MATERIAL FOR THE MOST DEMANDING INDUSTRIAL MARKETS
Perfectly adapted for the manufacturing of lost-wax casting parts, PLASTCure Cast materials meet the high expectations concerning the treatment chain and offer a very low residual ash content.
AN IDEAL MATERIAL FOR INVESTMENT CASTING OF ACCURATE AND THIN PARTS
Appearance |
Orange translucent
|
Liquid density (g/cm3) | 1.10 |
Viscosity @ 28°C (cps) |
300 – 500
|
Hardness (Shore D) | 70 – 75 |
Tensile Strength (MPa) ASTM D638 | N/A |
Strain at Break (%) ASTM D638 | > 10 |
Tensile Modulus (MPa) ASTM D638 | N/A |
Flexural Strength (MPa) ASTM D790-10 | 40 – 50 |
Elongation at Break (%) ASTM D790-10 | N/A |
Flexural Modulus (MPa) ASTM D790-10 | 800 – 1200 |
Izod Impact (J/m) ASTM D256A
|
N/A |
HDT@ 0.46 MPa (C°) ASTM D648 | N/A |
Residual ash content | No residue |
Water Absorption (%) ASTM D570 | N/A |
*Preliminary data. Performance characteristics of these materials may change according to product application, operating conditions, material combined or end use.